If any of our helmets was going to start a metal band, it would be this one. The Ultraflite MIPS Misanthrope Helmet will be releasing on vinyl for you collectors out there. The handcrafted FRP shell is lightweight but strong. A Darksmoke Fog Free Ultrashield™ pairs with the internal XL DropShield™ to keep the sun at bay. Inside, the MIPS Brain Protection System is the latest tech for mitigating impact forces.

LIGHTWEIGHT SHELL
Handmade composite fiberglass shell for strength with minimal weight

SPORT FIT
The most common helmet fit type, the Intermediate Oval head is slightly shorter side-to-side and a little wider front-to-back.

PREMIUM OPTICS
Includes a zero distortion Fog-Free Pinlock-Ready Clear & Dark Smoke Ultrashield™ with positive lock alongside an oversized Dark Smoke DropshieldUltra™

INCREASED VENTING
4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy-absorbing EPS foam resulting in superior helmet venting.

INTERIOR COMFORT
Removable moisture-Wicking Hydradry™ comfort liner for a custom feel 

REDUCED NOISE
Removable chin-curtain to reduce wind noise & buffeting

BLUETOOTH INTEGRATION
Upgradable to HelmLink™ Bluetooth® communication system (sold separately)

EQUIPPED WITH MIPS
A low-friction layer inside the helmet allows multi-directional movement of 10-15mm on certain angled impacts, intended to help reduce rotational force to the head.

EU/USA/JPN CERTIFICATION
Meets DOT FMVSS 218 (US), ECE 22-06 (Europe), & PSC (Japan) helmet safety standards
*Helmet does not ship with PSC and/or JIS and/or SG certification stickers unless purchased from an authorized dealer in that country

Origin: Imported

Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning
1. Remove interior lining as shown on page 10 of the User Manual. 2. Soak your interior in a mild solution of baby shampoo. 3. Rinse in clean water several times until all soap is gone. 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning
Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage
It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don't skip this step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. * Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth. * Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.) 2. For matte finishes, you know better than to polish a matte finish don’t you?

Advisory
One Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact. The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmet’s usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying or other signs of normal “wear and tear” that can contribute to helmet degradation.