Hypersport Prime Vest

Hypersport Prime

Hypersport Prime - Black

$230-$250 Suggested Retail USD

Live fast. Be fast. Go sleeveless. The Hypersport Prime vest is the Hero’s devil-may-care brother. TrackSpec™ leather plus D3O® back and side impact protectors are fitted for reliable reinforcement. The replaceable chest badge allows you to match your colors, ensuring mad street cred. If you’re too fast for sleeves and too cool for school, the Hypersport Prime vest wants you.

Buy local Buy online
  • Icon attack fit.

  • Material
  • 1.2-1.4mm TrackSpec™ leather chassis.

  • Protectors
  • D3O® impact protector - Back.

  • Liner
  • Removable insulated SatinCore™ vest liner.


Tighter to the body to be form fitting and aerodynamic at speed. Its figure-hugging cut means this style could be worn over a T-shirt or other slim layer.


Looking cool and staying cool are not mutually exclusive. Our gear for hot weather riding keeps air flow at a maximum while still providing ample coverage.


Leather is used for its abrasion resistance because it breathes and has the ability to absorb humidity. Also, it can keep you warm in colder weather and cool when it’s hot.

Vest Sizing Information

There are two variables to consider when sizing an Icon vest. The first is your jacket size, all Icon Vests are sized to fit over a jacket. The second is the the vest fit type, which defines the “cut” of the vest (Attack, Sport, or Relaxed). Instructions, sizing charts and vest fit details can be found below. The fit type of every Icon vest can be found in the first bullet point of the copy block for that individual product.

  • Attack
  • Sport
  • Relaxed
  • Chest
  • Attack Tailored Body
  • Sport Straight Body
  • Relaxed Straight Body

Chest Measurement Instructions

While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.

Mens Vest Sizing Chart
  • Vest Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • Jacket Size
  • XS XS
  • S S
  • M M
  • L L
  • XL XL
  • 2XL 2XL
  • 3XL 3XL
  • 4XL 4XL
  • 5XL 5XL
  • Chest Inches
  • XS 34-36
  • S 36-38
  • M 38-40
  • L 40-42
  • XL 42-44
  • 2XL 46-48
  • 3XL 48-50
  • 4XL 52-54
  • 5XL 54-56
  • Sleeve Inches
  • XS 30
  • S 31
  • M 32
  • L 33
  • XL 34
  • 2XL 35
  • 3XL 36
  • 4XL 37
  • 5XL 38
Mens Vest Conversion Chart
  • Vest Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • United Kingdom
  • XS 36
  • S 38
  • M 40
  • L 42/44
  • XL 44/46
  • 2XL 48
  • 3XL 50
  • 4XL 54
  • 5XL 56
  • Europe
  • XS 46
  • S 48
  • M 50
  • L 54
  • XL 56
  • 2XL 58
  • 3XL 60
  • 4XL 64
  • 5XL 66

Care Instructions

General Care

ICON® vests are tough and designed to withstand a great deal of asphalt induced abuse, but no vest can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your ICON® vest thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the vest. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your vest. Always store your vest in a dark, well ventilated area. Vests are best hung on a wide padded hanger. Do not wrap the vest in plastic or other nonporous materials as the leather portions of the vest need to breathe to avoid damage from mold or mildew. Finally, avoid exposing your vest (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes can weaken the structure of nylon, polyester, and leather lessening its inherent protective capabilities.


It is important to follow a few simple steps to prepare your vest for washing. Remove the insulated liner from the vest (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the vest. Make sure to close and fasten all the pocket flaps.


Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth.
Leather - The exterior of the leather vest can be cleaned with any garment leather cleaner such as ICON® leather cleaner and conditioner. Take caution to avoid getting cleaner in contact with any patches, embroidery, rubber, or plastic components. Bug strikes and road debris are best removed with a soft bristled toothbrush. DO NOT use any form of detergent, bleach, automotive cleaner, or dry cleaning chemicals. These items will damage the garment!

Insulated Liner - The insulated liner should be allowed to drip-dry only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process.
Vest - DO NOT use a machine dryer. If your leather vest becomes wet, dry it in a temperature neutral area away from heat or fans. Leather will dry better if it is placed on a towel to absorb water. When the leather is almost dry apply a leather conditioner, such as ICON® leather cleaner and conditioner, to keep it flexible. When the leather has completely dried apply an additional coat of conditioner. It is critical to care for your leather vest properly when it gets wet because leather can be irreparably damaged by moisture and mildew.

Hypersport Vest Patch
  • Color
  • Part Number
  • Size
  • Price
  • Black
  • Part Number 2840-0062
  • Size One Size
  • Price $5
  • White
  • Part Number 2840-0063
  • Size One Size
  • Price $5
  • Red
  • Part Number 2840-0064
  • Size One Size
  • Price $5
  • Blue
  • Part Number 2840-0065
  • Size One Size
  • Price $5
  • Green
  • Part Number 2840-0066
  • Size One Size
  • Price $5
  • HiViz
  • Part Number 2840-0067
  • Size One Size
  • Price $5
D3O® Viper 2 Back
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2702-0196
  • Size One Size
  • Price $30
D3O® Back Protector
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2706-0163
  • Size One Size
  • Price $25

Product Manual

Hypersport Prime
  • Color
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • Black
  • S 2830-0377
  • M 2830-0378
  • L 2830-0379
  • XL 2830-0380
  • 2XL 2830-0381
  • 3XL 2830-0382
  • 4XL 2830-0383
  • White
  • S 2830-0384
  • M 2830-0385
  • L 2830-0386
  • XL 2830-0387
  • 2XL 2830-0388
  • 3XL 2830-0389
  • 4XL 2830-0390

Live fast. Be fast. Go sleeveless.

TracSpec™ Leather

Premium Grade Cowhide

Sourced from the toughest hides available, our TracSpec™ leather is the same grade as used in high-end road race suits. TracSpec™ is a top-grain leather utilizing a pigmented outer surface for great wear characteristics, conforming to your body over time. A high-quality top-grain leather provides you with both durability and reliability necessary for motorcycle use.

Unit-Fused™ Construction

Unit Fused is an exclusive ICON design that incorporates welded TPU reinforcements onto mesh paneling. This creates a zone of cooling for rider comfort while maintaining structural integrity.

D3O® Impact Protector Package

Kidney & Back

D3O® unique patented and proprietary technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection applications. Delivering the most flexible and discreet protection on the market, it consistently outperforms traditional foam-based materials.

Clear The Lane

Featured Collection
Explore The Collection

Ronin Deployed

Custom Built by Icon Motosports
Explore the Bike