Stryker Mil-Spec Vest

Field Armor Stryker Mil-Spec

Field Armor Stryker Mil-Spec - Orange

$150 Suggested Retail USD

The Field Armor Stryker™ vest rewrote the definition of street protection. A truly innovative product that rightfully dominates the competition. Combining this product with our industry-leading Mil-Spec vest was an easy decision. All the low-profile protection afforded by the Stryker vest combined with the daytime and nighttime high conspicuity of the Mil-Spec vest. Truly a win-win situation.

Buy local Buy online
  • Icon adjustable fit. Sized to fit over jacket.

  • Material
  • Vented biofoam and airmesh chassis, Injection molded chest plate with

    integrated air intakes, Articulating injection molded hard back plates
    with air flow channels.

  • Certification
  • Tested and certified according to standard EN1621-2 : 2014.

  • Protectors
  • Custom molded ICON Stryker™ D3O® back insert.


Our adjustable fit has torso and elastic straps allowing for on the fly modifications so you can customize your fit.


Looking cool and staying cool are not mutually exclusive. Our gear for hot weather riding keeps air flow at a maximum while still providing ample coverage.


The the injection-molded plates feature integrated air intakes while the chassis is made with Airmesh and HydraDry™ to help wick away moisture.

Jacket Sizing Information

There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.

  • Attack
  • Sport
  • Relaxed
  • Chest
  • Attack Tailored Body
  • Sport Straight Body
  • Relaxed Straight Body
  • Sleeves
  • Attack Precurved Arms
  • Sport Semi-Precurved
  • Relaxed Straight Arms

Chest measurement instructions

While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.

Sleeve measurement instructions

While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.

Mens Jacket Sizing Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • Chest Inches
  • XS 34"-36"
  • S 36-38
  • M 38-40
  • L 40-42
  • XL 42-44
  • 2XL 46-48
  • 3XL 48-50
  • 4XL 52-54
  • 5XL 54-56
  • Sleeve Inches
  • XS 30
  • S 31
  • M 32
  • L 33
  • XL 34
  • 2XL 35
  • 3XL 36
  • 4XL 37
  • 5XL 38
Mens Jacket Conversion Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • United Kingdom
  • XS 36
  • S 38
  • M 40
  • L 42/44
  • XL 44/46
  • 2XL 48
  • 3XL 50
  • 4XL 54
  • 5XL 56
  • Europe
  • XS 46
  • S 48
  • M 50
  • L 54
  • XL 56
  • 2XL 58
  • 3XL 60
  • 4XL 64
  • 5XL 66

Care Instructions

General Care

ICON® vests are tough and designed to withstand a great deal of asphalt induced abuse, but no vest can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon vest thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the vest. Most Icon textile vests use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your vest. Always store your vest in a dark, well ventilated area. Vests are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your vest(or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.


It is important to follow a few simple steps to prepare your vest for washing. Remove the insulated liner from the vest (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the vest. Make sure to close and fasten all the pocket flaps.


Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Vest (Textile Areas) - Hand wash the vest with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the vest with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the vest!


Insulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Vest - DO NOT use a machine dryer. Subjecting the vest to a machine dryer will damage the vest and possibly the dryer itself. The only recommended method for drying the vest is drip-drying. Do not subject the vest to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.

Replacement Parts

    Field Armor Stryker Mil-Spec
    • Color
    • S/M
    • L/XL
    • 2XL/3Xl
    • Yellow
    • S/M 2701-0515
    • L/XL 2701-0516
    • 2XL/3XL 2701-0517
    • Orange
    • S/M 2701-0518
    • L/XL 2702-0519
    • 2XL/3Xl 2703-0520

    Daytime and nighttime high conspicuity.

    Reinforced Plates

    The molded plates offer maximum coverage while their D3O® inserts provide incredible impact dispersion.

    D3O® Inserts

    The D3O® inserts are integrated into a protective area to offer a higher level of impact protection. The unique patented technology provides a versatile, flexible material for a host of shock absorption applications.


    The Mil Spec vest was designed to pass all military requirements for a mandatory reflective vest without making you look like a construction worker in the process.

    Complete the Look

    Head to toe, we've got you covered

    We take the hit so you don't have to. Whether you're carving the canyon roads or headed for a night out, we've got the gear to keep you covered and looking fly.

    Spec 32

    ICON X Brammo Collaboration
    Explore The Bike

    Drift 4K

    Premium Drifting
    Watch The Video