Leather

Hypersport Pant

Hypersport

Hypersport - Stealth

$235 Suggested Retail USD

The ICON Hypersport pant is the elite accompaniment to the Hypersport jacket. Like the entire ICON Hypersport series, the Hypersport pant is constructed of multiple materials, each chosen for their unique performance properties. The main chassis is comprised of 1.2-1.4mm TrackSpec™ leather, stretch Cordura, and nylon lowers. This construction yields an incredibly durable pant while keeping overall weight to a minimum. TPU knee plates and D3O® knee impact protectors are coupled with integrated knee and lumbar flex zones for excellent on-bike mobility. Strategic areas of laser-perforated venting and TechMesh™ paneling help keep everything cool. The tailored fit (no diaper butt here) is accompanied by a ratchet fly closure and dual waist adjustment straps. The Hypersport pant includes an internal waist zipper that connects to either the Hypersport Prime jacket or the Hypersport jacket.

Buy local Buy online
Colors
Sizes
28
30
32
34
36
38
40
42
44
    Fit
  • Icon attack fit, Overboot fitment.

  • Material
  • 1.2-1.4mm TrackSpec™ leather chassis.

  • Protectors
  • D30® impact protectors - Knees.

  • Details
  • TPU injected knee plates, Integrated flex zones, Techmesh™ panels, Waist zipper connects to Hypersport™ series jackets, Waist adjusters.

Fit

Overpant
Relaxed
Attack
Tighter to the body to be form fitting and aerodynamic at speed.

Conditions

Cold
Mild
Hot
Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.

Material

Denim
Textile
Leather
Not only do we use leather for its abrasion resistance, but also because it breathes and has the ability to absorb humidity. It can keep you warm in cold weather and cool when it’s hot outside.

Pant sizing information

There are three variables to consider when sizing ICON pants. The first two are the waist and inseam measurements, which are what your pant size is based on. The third is the fit type of the pant. Measurement instructions and sizing charts can be found below. The fit type of every ICON pant can be found in the first bullet point of the copy block for that individual product.

Waist measurement information

While standing in a relaxed position, measure around your natural waistline, while keeping the tape measure parallel to the floor.

Inseam measurement information

While standing in a relaxed position, measure the total length of the inside of your leg, from crotch to ankle.

Mens Pant Sizing Chart
  • Waist Inches
  • 28
  • 30
  • 32
  • 34
  • 36
  • 38
  • 40
  • 42
  • 44
  • 46
  • 48
  • 50
  • 52
  • 54
  • Inseam Inches
  • 28 32
  • 30 32
  • 32 33
  • 34 33
  • 36 33
  • 38 34
  • 40 34
  • 42 34
  • 44 34
  • 46 34
  • 48 34
  • 50 34
  • 52 34
  • 54 34
Mens Pant Conversion Chart
  • Waist Inches
  • 28
  • 30
  • 32
  • 34
  • 36
  • 38
  • 40
  • 42
  • 44
  • 46
  • 48
  • 50
  • 52
  • 54
  • United Kingdom
  • 28 28
  • 30 30
  • 32 32
  • 34 34
  • 36 36
  • 38 38
  • 40 40
  • 42 42
  • 44 44
  • 46 46
  • 48 48
  • 50 50
  • 52 52
  • 54 54
  • Europe
  • 28 44
  • 30 46
  • 32 48
  • 34 50
  • 36 52
  • 38 54
  • 40 56
  • 42 58
  • 44 60
  • 46 62
  • 48 64
  • 50 66
  • 52 68
  • 54 70

Care Instructions

General Care
ICON® pants are tough and designed to withstand a great deal of asphalt induced abuse, but no pant can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your ICON® pants thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the pant. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your pants. Always store your pant in a dark, well ventilated area. Pants are best hung on a wide padded hanger. Do not wrap the pants in plastic or other nonporous materials as the leather portions of the pants need to breathe to avoid damage from mold or mildew. Finally, avoid exposing your pant (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes can weaken the structure of nylon, polyester, and leather lessening its inherent protective capabilities.

Pre-Cleaning
It is important to follow a few simple steps to prepare your pant for washing. Remove the insulated liner from the pants (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the pant. Make sure to close and fasten all the pocket flaps.

Cleaning
Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth.
Leather - The exterior of the leather pants can be cleaned with any garment leather cleaner such as ICON® leather cleaner and conditioner. Take caution to avoid getting cleaner in contact with any patches, embroidery, rubber, or plastic components. Bug strikes and road debris are best removed with a soft bristled toothbrush. DO NOT use any form of detergent, bleach, automotive cleaner, or dry cleaning chemicals. These items will damage the garment!

Drying
Insulated Liner - The insulated liner should be allowed to drip-dry only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process.
Pant - DO NOT use a machine dryer. If your leather pants becomes wet, dry it in a temperature neutral area away from heat or fans. Leather will dry better if it is placed on a towel to absorb water. When the leather is almost dry apply a leather conditioner, such as ICON® leather cleaner and conditioner, to keep it flexible. When the leather has completely dried apply an additional coat of conditioner. It is critical to care for your leather pants properly when it gets wet because leather can be irreparably damaged by moisture and mildew.

D3O® Evo Pro X Knee
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2704-0404
  • Size One Size
  • Price $25
D3O® Evo X Knee
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0161
  • Size One Size
  • Price $20

Product Manual

Hypersport
  • Color
  • 28
  • 30
  • 32
  • 34
  • 36
  • 38
  • 40
  • 42
  • 44
  • Stealth
  • 28 2811-0352
  • 30 2811-0353
  • 32 2811-0354
  • 34 2811-0355
  • 36 2811-0356
  • 38 2811-0357
  • 40 2811-0358
  • 42 2811-0359
  • 44 2811-0360

The elite accompaniment to the Hypersport Jacket.

TracSpec™ Leather

Premium Grade Cowhide

Sourced from the toughest hides available, our TracSpec™ leather is the same grade as used in high-end road race suits. TracSpec™ is a top-grain leather utilizing a pigmented outer surface for great wear characteristics, conforming to your body over time. A high-quality top-grain leather provides you with both durability and reliability necessary for motorcycle use.

Jacket to Pant Connectivity

The Hypersport pant includes an internal waist zipper that connects to both the Hypersport or the Hypersport Prime jacket.

D3O® Knee Impact Protector

Featured in an Adjustable Pocket

Housed with removable D3O® impact knee protectors for a higher level of defense, delivering the most flexible and discreet protection on the market.

Leather

Hypersport

Angled for Attack

Featured Video
Watch the Video

Live Fast, Dress Fast, Be Fast

Featured Collection
Explore the Collection