Jackets

Wireform Jacket

Wireform

Wireform - Orange

$230 Suggested Retail USD

Split the grid in the Wireform jacket. The chassis on this three-season jacket comes with slightly pre-curved arms, ideal for the sportbike riding position. Comfort molded neoprene collar, unique reinforced grid chassis, and a full D3O® (shoulders, elbows, and back) package speak to the Wireform’s riding pedigree. Reflective hits provide visibility in low-light conditions, while a removable insulated SatinCore™ liner extends your riding season deep into the fall.

Buy local Buy online
Colors
Sizes
S
M
L
XL
2XL
3XL
4XL
    Fit
  • Icon sport fit.

  • Material
  • Dynax™ ballistic nylon chassis.

  • Protectors
  • D3O® impact protectors - Shoulders, elbows, back.

  • Liner
  • Removable insulated SatinCore™ liner.

Waterproofing

Good
Better
Best
Our Waterproofing Level 1 will get you through light rain, average snow, and light pressure.

Fit

Relaxed
Sport
Attack
Our sport fit jacket is designed with slightly pre-curved arms, comfortable for an aggressive riding position. It is loose without being baggy for increased mobility without the bulk.

Conditions

Cold
Mild
Hot
Our 3-Season jacket will keep you comfortable in practically any riding situation. The weather reisitant Nylon shell will provide protection from the elements while the Insulated SatinCore™ Liner can be removed on warmer days.

Jacket Sizing Information

There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.

  • Attack
  • Sport
  • Relaxed
  • Chest
  • Attack Tailored Body
  • Sport Straight Body
  • Relaxed Straight Body
  • Sleeves
  • Attack Precurved Arms
  • Sport Semi-Precurved
  • Relaxed Straight Arms

Chest measurement instructions

While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.

Sleeve measurement instructions

While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.

Mens Jacket Sizing Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • Chest Inches
  • XS 34"-36"
  • S 36-38
  • M 38-40
  • L 40-42
  • XL 42-44
  • 2XL 46-48
  • 3XL 48-50
  • 4XL 52-54
  • 5XL 54-56
  • Sleeve Inches
  • XS 30
  • S 31
  • M 32
  • L 33
  • XL 34
  • 2XL 35
  • 3XL 36
  • 4XL 37
  • 5XL 38
Mens Jacket Conversion Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • United Kingdom
  • XS 36
  • S 38
  • M 40
  • L 42/44
  • XL 44/46
  • 2XL 48
  • 3XL 50
  • 4XL 54
  • 5XL 56
  • Europe
  • XS 46
  • S 48
  • M 50
  • L 54
  • XL 56
  • 2XL 58
  • 3XL 60
  • 4XL 64
  • 5XL 66

Care Instructions

General Care

ICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.

Pre-Cleaning

It is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.

Cleaning

Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!

Drying

Insulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.

D3O® Viper 2 Back
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2702-0196
  • Size One Size
  • Price $30
D3O® Back Protector
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2706-0163
  • Size One Size
  • Price $25
D3O® Evo Pro X Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0178
  • Size One Size
  • Price $25
D3O® Evo X Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0159
  • Size One Size
  • Price $20
D3O® Evo Pro X Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0177
  • Size One Size
  • Price $25
D3O® Evo X Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0160
  • Size One Size
  • Price $20

Product Manual

Wireform
  • Color
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • Black
  • S 2820-3581
  • M 2820-3582
  • L 2820-3583
  • XL 2820-3584
  • 2XL 2820-3585
  • 3XL 2820-3586
  • 4XL 2820-3587
  • Blue
  • S 2820-3588
  • M 2820-3589
  • L 2820-3590
  • XL 2820-3591
  • 2XL 2820-3592
  • 3XL ---
  • 4XL ---
  • Green
  • S 2820-3593
  • M 2820-3594
  • L 2820-3595
  • XL 2820-3596
  • 2XL 2820-3597
  • 3XL ---
  • 4XL ---
  • Orange
  • S 2820-3598
  • M 2820-3599
  • L 2820-3600
  • XL 2820-3601
  • 2XL 2820-3602
  • 3XL ---
  • 4XL ---
  • Red
  • S 2820-3603
  • M 2820-3604
  • L 2820-3605
  • XL 2820-3606
  • 2XL 2820-3607
  • 4XL ---
  • 5XL ---

Blur the line between street and sport.

Waterproofing

Level 1

The fabric has a polyurethane coating and contains no exposed zippers, vents, or mesh to keeping you dry in light rain and average snow.

Dynax™

High Performance Abrasion Resistant

Our Dynax mesh is made from high-performance polyamide yarn that is tear/abrasion resistant, has a high melting point, and preforms well in hot conditions.

D3O® Impact Protector Package

Shoulders, Elbows, & Back

Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.

Driftpocalypse Daytona

Featured Bike
Explore the Bike

Drift 4K

Premium Drifting
Watch The Video