Jackets

Anthem2 Jacket

Anthem 2

Anthem 2 - Black

$190 Suggested Retail USD

The Anthem 2 Jacket defines the textile category with a revised design and segment-busting features. The proven Fighter Mesh™ chassis is necessary for venting and breathability, and is further reinforced with ballistic nylon paneling. Industry-leading D3O® shoulder, elbow, and back impact protectors are standard. A full-length SatinCore liner adds modularity to the ensemble, and inspired pattern design and colorblocking elevate the Anthem 2 over its drab peers. Intrepid design, proven performance.

Buy local Buy online
Colors
Sizes
S
M
L
XL
2XL
3XL
4XL
    Fit
  • Icon relaxed fit.

  • Material
  • Fighter Mesh™ chassis, Iron weave mesh paneling.

  • Protectors
  • D3O® impact protectors - Shoulders, elbows, back.

  • Liner
  • Removable insulated SatinCore™ full liner.

Fit

Relaxed
Sport
Attack
Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over a jacket or sweater.

Conditions

Cold
Mild
Hot
Ventilation where you need it results in premium gear with maximum air flow and breathability for hot to mild riding conditions.

Material

Leather
Textile
Mesh
Our mesh material has the advantage of high strength, yet still retains its flexibility. It's light and cool, perfect for Spring and Summer riding.

Jacket Sizing Information

There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.

  • Attack
  • Sport
  • Relaxed
  • Chest
  • Attack Tailored Body
  • Sport Straight Body
  • Relaxed Straight Body
  • Sleeves
  • Attack Precurved Arms
  • Sport Semi-Precurved
  • Relaxed Straight Arms

Chest measurement instructions

While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.

Sleeve measurement instructions

While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.

Mens Jacket Sizing Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • Chest Inches
  • XS 34"-36"
  • S 36-38
  • M 38-40
  • L 40-42
  • XL 42-44
  • 2XL 46-48
  • 3XL 48-50
  • 4XL 52-54
  • 5XL 54-56
  • Sleeve Inches
  • XS 30
  • S 31
  • M 32
  • L 33
  • XL 34
  • 2XL 35
  • 3XL 36
  • 4XL 37
  • 5XL 38
Mens Jacket Conversion Chart
  • Size
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • 5XL
  • United Kingdom
  • XS 36
  • S 38
  • M 40
  • L 42/44
  • XL 44/46
  • 2XL 48
  • 3XL 50
  • 4XL 54
  • 5XL 56
  • Europe
  • XS 46
  • S 48
  • M 50
  • L 54
  • XL 56
  • 2XL 58
  • 3XL 60
  • 4XL 64
  • 5XL 66

Care Instructions

General Care

ICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.

Pre-Cleaning

It is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.

Cleaning

Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!

Drying

Insulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.

D3O® Viper 2 Back
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2702-0196
  • Size One Size
  • Price $45
D3O® Back Protector
  • Color
  • Part Number
  • Size
  • Price
  • Mens
  • Part Number 2706-0163
  • Size One Size
  • Price $30
D3O® Evo Pro X Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0178
  • Size One Size
  • Price $35
D3O® Evo X Elbow
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0159
  • Size One Size
  • Price $25
D3O® Evo Pro X Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0177
  • Size One Size
  • Price $35
D3O® Evo X Shoulder
  • Color
  • Part Number
  • Size
  • Price
  • Left & Right
  • Part Number 2706-0160
  • Size One Size
  • Price $25

Product Manual

Anthem 2
  • Color
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • 4XL
  • Black
  • S 2820-3357
  • M 2820-3358
  • L 2820-3359
  • XL 2820-3360
  • 2XL 2820-3361
  • 3XL 2820-3362
  • 4XL 2820-3363
  • White
  • S 2820-3369
  • M 2820-3370
  • L 2820-3371
  • XL 2820-3372
  • 2XL 2820-3373
  • 3XL ---
  • 4XL ---
  • Grey
  • S ---
  • M 2820-3380
  • L 2820-3381
  • XL 2820-3382
  • 2XL 2820-3383
  • 3XL ---
  • 4XL ---
  • HiViz
  • S ---
  • M 2820-3385
  • L 2820-3386
  • XL 2820-3387
  • 2XL ---
  • 3XL ---
  • 4XL ---

Intrepid design, proven performance.

Fighter Mesh

Lightweight, Durable, and Comfortable

Our Fighter Mesh is lightweight, durable, comfortable, and allows intake and exhaust of airflow, dramatically reducing the chance of overheating.

Reinforcement

Ballistic Nylon

The ballistic nylon is strategically placed to reinforce tumble zones. This weave pattern provides exceptional tear and abrasion resistance.

D3O® Impact Protector Package

Shoulders, Elbows, & Back

Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.

ZX3RR

Custom Built By Icon Motosports
Explore the Bike

Own The Urban Circuit

Featured Video
Watch The Video