Alliance

Overlord

Overlord

Overlord - Black

$195 Suggested Retail USD

Come correct or don’t come at all. Everyone knows looking flash is the first step to more horsepower. The Alliance Overlord has all the street style swagger you’ve come to expect from ICON. Team the Alliance up with the Overlord SB2 jacket and dial your riding kit to eleven.

Buy local Buy online
Colors
Sizes
XS
S
M
L
XL
2XL
3XL
    WORLD STANDARD
  • Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

  • SHIELD
  • Includes Clear quick-change Fog-Free Proshield™ with Prolock™ shield locking system.

  • LINER
  • Sublimated Hydradry™ moisture wicking liner.

  • SHELL
  • Injection molded polycarbonate shell for strength and durability.

Fit

Round
Intermediate Oval
Long Oval
The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

Venting

Good
Better
Best
5 air intakes and 5 exhaust ports combined with strategically placed channeling in the interior energy absorbing EPS foam forces air into the helmet at low and high speeds.

Weight

Lightest
Light
Average
A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

Choosing the correct helmet size

Helmet fit is critical to helmet protective performance. Different helmets fit differently due to differences in design and construction. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.

Helmet sizing information

To achieve proper helmet fitment, begin by finding your head circumference size using the method described below. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the perfect fit. Ask your dealer or visit www.rideicon.com for more information.

Head measurement instructions

Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart below.

Helmet Sizing Chart
  • Shell
  • 2XS
  • XS
  • S
  • M
  • L
  • XL
  • 2XL
  • 3XL
  • Hat Size
  • 2XS 6 3/8 - 6 1/2
  • XS 6 5/8 - 6 3/4
  • S 6 7/8 - 7
  • M 7 1/8 - 7 1/4
  • L 7 3/8 - 7 1/2
  • XL 7 5/8 - 7 3/4
  • 2XL 7 7/8 - 8
  • 3XL 8 1/8 - 8 1/4
  • Inches
  • 2XS 20 1/8 - 20 1/2
  • XS 20 7/8 - 21 1/4
  • S 21 5/8 - 22
  • M 22 3/8 - 22 3/4
  • L 23 1/8 - 23 1/2
  • XL 24 - 24 3/8
  • 2XL 24 3/4 - 25 1/8
  • 3XL 25 1/2 - 26
  • Centimeters
  • 2XS 51-52
  • XS 53-54
  • S 55-56
  • M 57-58
  • L 59-60
  • XL 61-62
  • 2XL 63-64
  • 3XL 65-66

Care Instructions

Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning 
1. Remove interior lining as shown on page 10 of the User Manual. 2. Soak your interior in a mild solution of baby shampoo. 3. Rinse in clean water several times until all soap is gone. 4. Let interior air dry and replace accordingly. * Never machine wash or dry your helmet interior.

Shield Cleaning 
Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage 
It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets) 
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don't skip this step!) 2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. 3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. * Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets) 
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. 2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth. * Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance 
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.) 2. For matte finishes, you know better than to polish a matte finish don’t you?

Advisory 
One Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact. The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmet’s usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying or other signs of normal “wear and tear” that can contribute to helmet degradation.

Replacement Parts

    Alliance Comfort Liner
    • Part Number
    • Color
    • Size
    • Price
    • 0134-1266
    • Color HydraDry™
    • Size 15mm = XS
    • Price $25
    • 0134-1267
    • Color HydraDry™
    • Size 12mm = S
    • Price $25
    • 0134-1268
    • Color HydraDry™
    • Size 15mm = M
    • Price $25
    • 0134-1269
    • Color HydraDry™
    • Size 12mm = L
    • Price $25
    • 0134-1625
    • Color HydraDry™
    • Size 12mm = XL
    • Price $25
    • 0134-1270
    • Color HydraDry™
    • Size 9mm = 2XL
    • Price $25
    • 0134-1271
    • Color HydraDry™
    • Size 7mm = 3XL
    • Price $25
    Alliance Cheekpads
    • Part Number
    • Color
    • Size
    • Price
    • 0134-1260
    • Color HydraDry™
    • Size 40mm = XS
    • Price $20
    • 0134-1261
    • Color HydraDry™
    • Size 35mm = S
    • Price $20
    • 0134-1262
    • Color HydraDry™
    • Size 30mm = M
    • Price $20
    • 0134-1263
    • Color HydraDry™
    • Size 25mm = L/XL
    • Price $20
    • 0134-1264
    • Color HydraDry™
    • Size 20mm = 2XL
    • Price $20
    • 0134-1265
    • Color HydraDry™
    • Size 15mm = 3XL
    • Price $20
    Alliance Supervents
    • Part Number
    • Color
    • Size
    • Price
    • 0133-0211
    • Color Black Gloss
    • Size One Size
    • Price $30
    • 0133-0215
    • Color Rubatone Black
    • Size One Size
    • Price $30
    Alliance Sideplates
    • Part Number
    • Color
    • Size
    • Price
    • 0133-0340
    • Color Black Gloss
    • Size One Size
    • Price $15
    • 0133-0341
    • Color White
    • Size One Size
    • Price $15
    • 0133-0343
    • Color Rubatone Black
    • Size One Size
    • Price $15
    • 0133-0590
    • Color Medallion
    • Size One Size
    • Price $25
    • 0133-0342
    • Color Silver
    • Size One Size
    • Price $25
    • 0133-0847
    • Color Berserker Black
    • Size One Size
    • Price $25
    • 0133-0848
    • Color Berserker Blue
    • Size One Size
    • Price $25
    • 0133-0849
    • Color Berserker Pink
    • Size One Size
    • Price $25
    • 0133-0850
    • Color Crysmatic Blue
    • Size One Size
    • Price $25
    • 0133-0851
    • Color Crysmatic Pink
    • Size One Size
    • Price $25
    • 0133-0852
    • Color Crysmatic Green
    • Size One Size
    • Price $25
    • 0133-0960
    • Color Lucifur
    • Size One Size
    • Price $25
    • 0133-1018
    • Color Oros Boros
    • Size One Size
    • Price $25
    • 0133-1019
    • Color Overlord Black
    • Size One Size
    • Price $25
    • 0133-1020
    • Color Overlord Blue
    • Size One Size
    • Price $25
    • 0133-1021
    • Color Overlord HiViz
    • Size One Size
    • Price $25
    • 0133-1022
    • Color Overlord Red
    • Size One Size
    • Price $25
    Alliance Breath Deflector
    • Part Number
    • Color
    • Size
    • Price
    • 0133-0306
    • Color Black
    • Size One Size
    • Price $5
    • 0133-0368
    • Color White
    • Size One Size
    • Price $5
    Alliance Chin Curtain
    • Part Number
    • Color
    • Size
    • Price
    • 0134-0803
    • Color Camo
    • Size One Size
    • Price $7
    • 0134-1618
    • Color Black
    • Size One Size
    • Price $7
    Overlord
    • Color
    • XS
    • S
    • M
    • L
    • XL
    • 2XL
    • 3XL
    • Black
    • XS 0101-10693
    • S 0101-10694
    • M 0101-10695
    • L 0101-10696
    • XL 0101-10697
    • 2XL 0101-10698
    • 3XL 0101-10699
    • Blue
    • XS 0101-10700
    • S 0101-10701
    • M 0101-10702
    • L 0101-10703
    • XL 0101-10704
    • 2XL 0101-10705
    • 3XL 0101-10706
    • Hi-Viz
    • XS 0101-10707
    • S 0101-10708
    • M 0101-10709
    • L 0101-10710
    • XL 0101-10711
    • 2XL 0101-10712
    • 3XL 0101-10713
    • Red
    • XS 0101-10714
    • S 0101-10715
    • M 0101-10716
    • L 0101-10717
    • XL 0101-10718
    • 2XL 0101-10719
    • 3XL 0101-10720

    Style for Miles

    Exterior

    Alliance Helmet

    The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The main ingredient is the Supervent system featuring oversized intake ports controlled by individual vent triggers along with recessed supervenes to reduce wind noise.

    Shield

    Alliance Helmet

    The quick-change fog-free Proshield™ keeps the bugs in check while the ProLock™ shield locking system creates a tight seal from the elements.

    Interior

    Alliance Helmet

    The removable sweat wicking Hydradry liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry liner to effectively reduce heat build up.

    Icon ProShield™

    Designed to Fit Alliance and Alliance GT helmets

    The Icon Proshield™ (IC-02) is fitted with a helmet shield lock to keep your shield securely closed. Sideplates (Sold Separately) mount to each side of the Proshield for a more custom, finished look. The Proshield™ is designed to fit the Airframe and Alliance Helmets.

    Explore The Shield

    Overlord SB2

    Featured Collection
    Explore The Collection

    18 Spring Helmets

    Featured Collection
    Explore The Collection